Sharp FO-4970 FO-4650 FO-4970 Operation Manual - Page 151
Setting 17: RETRANSMISSION TIMES, Setting 18: RETRANSMISSION INTERVAL, Setting 19: HEATER MODE,
View all Sharp FO-4970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Optional Settings Note: This setting will only appear if your dealer has installed the paper cassette option and Option Setting 33 (Seperate Mode) is turned off. ♦ Initial setting: 1 Setting 17: RETRANSMISSION TIMES This sets the number of times the fax will reattempt a memory transmission which has been interrupted by a line error or power failure. Enter any 2-digit number from 01 to 14, or enter 00 to turn off the function. ♦ Initial setting: 10 Setting 18: RETRANSMISSION INTERVAL You can select the number of minutes the fax waits between each memory retransmission attempt. Enter 01 for 1 minute, 02 for 2 minutes, etc., up to a maximum of 15 minutes. If you do not want the fax to wait between attempts, enter 00. ♦ Initial setting: 02 Setting 19: HEATER MODE To conserve power, you can turn off the laser printer heater in your fax machine. When this is done, the heater will turn on automatically when you receive a document (there will be a slight delay before printing while the heater warms up) and turn off when printing is completed. Press 2 to turn off the heater, or 1 to keep it on. ♦ Initial setting: 2 Setting 20: ANTI-JUNK FAX Press 1 to block reception from fax numbers entered in the Anti Junk Fax List. Press 2 to allow reception from all numbers. ♦ Initial setting: 2 149 6. Option Settings