Sharp FO-4970 FO-4650 FO-4970 Operation Manual - Page 48
Speed Dial, Start
View all Sharp FO-4970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Programming Auto-Dial Numbers Clearing auto-dial numbers Note: You cannot clear a number if it is used in a program or timer operation, if it is used to specify the relay fax machine in a relay group, or if it is included in a Group Key. First clear the number from the operation or group, then perform the following clearing procedure. To check where the number is used, print out the Program/Group List, the Timer List, and/or the Relay Group List as explained in Chapter 7. 1 Press these keys: The display will show: 1:FAX/TEL. # MODE 1=SET, 2=CLEAR FUNCTION 3 1 2 Press 2 to select CLEAR. 2 3 To clear a Rapid Key, press the Rapid Key. To clear a Speed Dial number, press the SPEED DIAL key and then enter the number with the numeric keys. (If you enter less than 2 digits on the FO4650, or 3 digits on the FO-4970, press the START key to complete the entry.) 02 B Example: Rapid Key 02 4 Press the START key. START 46