Sharp FP-P35CX FP-P35CX Operation Manual - Page 12
Care And Maintenance - hepa air purifier
![]() |
UPC - 074000662179
View all Sharp FP-P35CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
CARE AND MAINTENANCE To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically. When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. Dust Sensor Main Unit True HEPA Filter Do not wash the True HEPA Filter. Washing will not improve filter performance, and it may cause electric shock or malfunction. Pre-Filter MAIN UNIT Care Cycle 1 month To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to remain, they may become hard to clean. Wipe with a dry, soft cloth For stubborn stains or dirt, use a soft cloth dampened with warm water. Do not use volatile fluids Benzene, paint thinner, polishing powder, etc., may damage the surface. Do not use detergents Detergent ingredients may damage the unit. Keep the unit away from water DUST SENSOR Care Cycle 2 months The sensitivity of the sensor will become unstable if the sensor is dirty or blocked. Remove dust from the surfaces of the sensor opening using a vacuum cleaner. Opening of dust sensor FILTER CLEANING Care Cycle Clean the top surface of the Pre- Filter lightly with a vacuum cleaner. When Pre- Filter is very dirty, wash it in water with mild kitchen detergent and dry it well in the shade. After cleaning, press the MODE Selection Button for the 3 seconds with the power cord connected to the outlet. A long beep will be heard and the operation hours will be reset. Then the Filter Indicator Light will go out automatically, 2 months Pre-Filter E-10
![](/manual_guide/products/sharp-fpp35cx-fpp35cx-operation-manual-f73387b/12.png)