Sharp HT-SL50 HT-SL50 Operation Manual - Page 6

Precautions - not working

Page 6 highlights

Precautions General ● Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) 4" (10 cm) Warning: The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. 4" (10 cm) ACTIVE SUBWOOFER SYSTEM HT-SL50 ● Use the unit on a firm, level surface free from vibration. ● Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. ● Do not place anything on top of the system. ● Do not expose the unit to moisture, to temperatures higher than 140°F (60°C) or to extremely low temperatures. ● If your system does not work properly, disconnect the AC power cord from the AC outlet and replug. ● In case of an electrical storm, unplug the unit for safety. ● Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. ● The AC power plug is used as a disconnect device and shall always remain readily operable. ● Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. ● This unit should only be used within the range of 41°F - 95°F (5°C - 35°C). E-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

E-5
Use the unit on a firm, level surface free from vibration.
Keep the unit away from direct sunlight, strong
magnetic
fields,
excessive
dust,
humidity
and
electronic/electrical
equipment
(home
computers,
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the system.
Do not expose the unit to moisture, to temperatures
higher than 140
°
F (60
°
C) or to extremely low
temperatures.
If your system does not work properly, disconnect the
AC power cord from the AC outlet and replug.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the AC outlet, as pulling the cord can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
This unit should only be used within the range of
41
°
F - 95
°
F (5
°
C - 35
°
C).
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result in
a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
Precautions
Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
4" (10 cm) of free space along the sides, top and back
of the equipment.
General
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)