Sharp KB-3401L KB-3401LS , KB-3401LK , KB-3401LW Operation Manual - Page 12
Before Operating
View all Sharp KB-3401L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
before operating Oven Microwave Before operating your new range make sure you read and understand this operation manual completely. • Before the range can be used, follow these steps: 1 Plug in the range. The Microwave Drawer display will show WAIT for 30 seconds, then ENJOY YOUR RANGE TOUCH CLEAR AND TOUCH CLOCK . 2 Touch the Stop/Clear pad. : will appear. 3 Set clock. Note: • Please do not open or close the lower oven door for 30 seconds after plugged in. TO SET THE CLOCK 1 Touch Timer/Clock pad and number 2. 2 Touch number pads for correct time of day and touch Timer/Clock pad again. This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the Stop/Clear pad and re-enter the time. • If the electrical power supply to your range should be interrupted, the display will intermittently show WAIT for 30 seconds, then ENJOY YOUR RANGE TOUCH CLEAR AND TOUCH CLOCK after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch Stop/Clear pad and reset the clock for the correct time of day. Note: • The Microwave Drawer can be programmed with the drawer open except for Start/Minute Plus. The Oven can be started with the door open except for self-cleaning. Timers Your Insight Range features two separate independent Kitchen Timers. The timer on the Oven side (left) of the control panel is labeled Timer/Hold to Clear/3 Min Plus. The maximum length of this timer is 9 hours, 99 minutes. You set this timer in hours and minutes. For example, one hour 30 minutes is entered as 130. 1:30 will appear. For times over one hour, the time will count down in hours and minutes. When the timer reaches 60 minutes, the timer will begin counting down in minutes and seconds. To cancel Timer/Hold to Clear/ 3 Min Plus, you must touch and hold the Timer/Hold to Clear/3 Min Plus pad for 3 seconds. The timer on the Microwave side (right) of the control panel is labeled Timer/Clock. The maximum length of this timer is 99 minutes, 99 seconds. This timer is set in minutes and seconds. It will always count down in minutes and seconds. To cancel this timer, simply touch Stop/Clear. See page 21. Stop/Clear Touch the Stop/Clear pad to: 1 Erase if you make a mistake during programming. 2 Cancel timer on Microwave side. 3 Stop the Oven or Microwave Drawer temporarily during timed cooking. 4 Return the time of day to the display. 5 Cancel a program during cooking, touch twice for timed cooking. 12