Sharp KB-3401L KB-3401LS , KB-3401LK , KB-3401LW Operation Manual - Page 22

Microwave Drawer cooking Multiple sequence cooking Your Microwave Drawer can be programmed for up to 4 automatic cooking sequences, switching from one power level setting to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your Microwave Drawer can do this automatically. 1 First enter cooking time. Then touch Power Level pad once for 100% cooking or repeat touching Power Level pad for a lower power level. 2 Enter second cooking time. Repeat touching Power Level pad for desired level. You can follow this procedure up to 4 times. TOUCH START 3 Touch START/Minute Plus pad. Note: • If Power Level pad is touched once, HIGH will be displayed. • If 100% is selected as the final sequence, it is not necessary to touch the Power Level pad. • If you wish to know power level during cooking, simply touch the Power Level pad. As long as your finger is touching the Power Level pad, the power level will be displayed. Minute plus™ Minute Plus allows you to cook for a minute at 100% by simply touching the Minute Plus pad. You can also extend cooking time in multiples of 1 minute by repeatedly touching the Minute Plus pad during manual cooking. Note: • To use Minute Plus, touch pad within 3 minutes after cooking, closing the Microwave Drawer or touching the Stop/Clear pad. • Minute Plus cannot be used with Sensor settings or Defrost. Audible signal elimination If you wish to have the Microwave Drawer operate with no audible signals, see page 30. End of cooking reminder At end of cooking, the Microwave Drawer will signal every 10 seconds for the first minute; then every 3 minutes until the Stop/Clear pad is touched, the Microwave Drawer is opened or up to 1 hour. This can be cancelled. See page 31. HELP Each setting of Sensor Reheat, Sensor Cook, Sensor Popcorn, Reheat, Micro Warm and Defrost has a cooking hint. If you wish to check, touch Custom Help whenever HELP is lighted in the Interactive Display for these and other manual operation hints. 22