Sharp LC-13SH4U LC-13SH4U LC-15SH4U LC-20SH4U Operation Manual - Page 11

EZ SETUP EZ SETUP during the First Power On ■ When you turn on the TV for the first time, it will automatically memorize the broadcasting channels. Please perform the following instructions before you press POWER. (1) Insert the batteries into the remote control. (2) Connect the antenna cable to the LCD TV set. (3) Connect the AC cord to the POWER INPUT terminal of the LCD TV set and plug in the AC cord to the wall outlet. POWER 3 Press ENTER to access START EZ SETUP mode. Press '/" to select "YES", and press ENTER. A • If you want to stop the EZ SETUP process once it has started, press MENU and it will be canceled. If you want to set up again, please see CH-SETTING. YES NO CONNECT ANTENNA OR CABLE. The tuner will automatically search for the broadcasting and cable TV channels. (The channel number will automatically increase when it appears.) PLEASE WAIT AUTO PROGRAMMING 1 Press POWER, located on the upper side of the main unit, to turn on the TV. The SELECT LANGUAGE mode will be displayed. Press '/" to select "ENGLISH", "ESPAÑOL" (Spanish) or "FRANÇAIS" (French). ENGLISH ESPAÑOL FRANÇAIS 2 Press ENTER to access CH-SETTING mode. Press '/" to select "ON" or "OFF". When you select "ON", the LCD TV set will automatically memorize the broadcasting channels. ON OFF 4 Once EZ SETUP is completed, the lowest channel number memorized will be displayed. 2 STEREO SAP MONO A • Do not let the EZ SETUP screen remain unattended for a long time. • If EZ SETUP does not memorize all the channels in your region, please see CH-SETTING for more information on manually memorizing the channels using CH-SETTING. • It may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or the frequency jamming is occurring around the area. Please see CH-SETTING for more information on manually memorizing the channels using CH-SETTING. A • If you select "OFF", EZ SETUP will be canceled.