Sharp LC-20SH21U LC-20SH21U Operation Manual - Page 16

Basic Operation Turning On and Off the Power Switching the Input Modes (INPUT1/ INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV) POWER indicator POWER 1 Turn on the power of the connected video equipment. 2 Press INPUT to select the applicable input source. The screen changes in order of INPUT1, INPUT2, INPUT3, INPUT4, INPUT5 (PC) and TV each time INPUT is pressed. POWER indicator Power ON Power OFF / Standby No Signal Power OFF (Except TV mode) Lighting (Blue) Light Off Lighting (Amber) Sound Volume Ƈ To adjust the volume Ƈ Turning On the Power Press POWER on the TV or POWER on the remote control. POWER indicator (Blue): The TV is on. ("Please wait.." Please wait will appear for a few seconds on the screen.) Ƈ Turning Off the Power Press POWER on the TV or POWER on the remote control. The TV enters standby mode and the image on the screen disappaers. The POWER indicator on the TV turns off. $ • If you are not going to use this TV for a long time, be sure to remove the AC cord from the wall outlet. • Small amount of electric power is still consumed even when the power is turned off. Press VOL (+) to increase the sound volume. The bar indicator shifts right. Press VOL (-) to decrease the sound volume. The bar indicator shifts left. Ƈ To mute the sound Press MUTE to temporarily turn off the sound. Press MUTE or VOL (+)/(-) to turn the sound back to the previous level. The mute function is automatically turned off when any of the following buttons are pressed: POWER, MUTE, VOL(+)/(-) . 16