Sharp LC-20SH21U LC-20SH21U Operation Manual - Page 31
Connecting a PC
UPC - 074000363656
View all Sharp LC-20SH21U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Connecting a PC Viewing an Image from a PC Use the INPUT 5 (PC) terminal to connect a PC. $ • The PC input terminals are DDC1/2B-compatible. • Refer to P. 21 for a list of PC signals compatible with the System. • Make sure to select the same signal values for the output signal of a PC and the input signal of the LCD TV set before connecting with the PC. (See P. 21) • Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to your PC's manuals regarding converting to external output. To ANALOG To ANALOG RGB RGB terminal output terminal PC RGB cable (commercially available) ø 3.5 mm stereo minijack cable (commercially available) To AUDIO input terminal To Audio output terminal Connecting the RGB cable • Connect the RGB cable making sure WKDWLW¿WVFRUUHFWO\LQWRWKHWHUPLQDO 7KHQ¿UPO\VHFXUHWKHFRQQHFWRUV by tightening the screws on both sides of the plug. Signal names for 15-pin mini D-sub connecter 543 21 10 9 8 7 6 15 14 13 12 11 PinNo. Signalme R G B Not connected CSYNC PinNo. ignalmeS GND (Ground) GND (Ground) GND (Ground) +5V GND (Ground) $ • Pin No. 5 is not used for inputting the signal. • Pin No. 9 is not connected with the supplied RGB cable. PinNo. T Z H U W Signalme Not connected SDA HD VD SCL Displaying an Image from a PC To view an image from a PC, perform the following procedure. Select the INPUT5 mode using INPUT on the remote control or the LCD TV set. (See P. 16) Select the PC input signal. (See P. 21) Adjust the "Auto SYNC." items if the PC image does not come in clearly. (See P. 21) 31