Sharp LC-37GD6U LC-26GD6U LC-32GD6U LC-37GD6U Operation Manual - Page 38
Power control
View all Sharp LC-37GD6U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Basic adjustment settings Power control Power control setting allows you to save energy. Power control for AV source No signal off When set to "Enable", the power will automatically shut down if no signal inputs for 15 minutes. Power control for PC source Power control setting allows you to save energy. Power management When set, the power will automatically shut down. 1 Repeat steps 1 and 2 in No signal off. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Power Control". 3 Press a/b to select "No Signal Off", and then press ENTER. 4 Press c/d to select "Enable", and then press ENTER. 2 Press a/b to select "Power Management", and then press ENTER. 3 Press a/b to select "Mode1" or "Mode2", and then press ENTER. Off Mode1 Mode2 Enable Disable • Five minutes before the power shuts down, remaining time displays every minute. NOTE • "Disable" is factory preset value. • When a TV program finishes, this function may not operate. • Does not function in conjunction with digital broadcasts. No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. Selected item Description Off Mode1 Mode2 • No power management • Factory preset value. • If no signal inputs for 8 minutes, the power shuts down. • Even if you start using the PC and the signal inputs again, the TV stays off. • The TV turns on again by pressing TV POWER on the remote control unit. (See page 20). • Press POWER on the display will have the same result. • If no signal inputs for 8 seconds, the power shuts down. • When you start using the PC and the signal inputs again, the TV turns on. 1 Repeat steps 1 and 2 in No signal off. 2 Press a/b to select "No Operation Off", and then press ENTER. 3 Press c/d to select "Enable", and then press ENTER. • Five minutes before the power shuts down, remaining time displays every minute. NOTE • "Disable" is factory preset value. NOTE • When using a digital PC and setting "Mode2" in Power management, the power may not turn back on automatically even if the signal inputs again. • If you turn off the power by disconnecting AC cord when setting "Mode2" in power management, the TV may not function properly after turning the power on again. In such case, press TV POWER on the remote control unit. • Press POWER on the display will have the same result. 37