Sharp LC-46D92U LC-46D92U LC-52D92U Operation Manual - Page 30

Basic adjustment settings Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. 1 Press MENU to display the MENU screen, and then press c/d to select "Picture". 2 Press a/b to select "Advanced", and then press ENTER. 3 Press a/b to select a specific adjustment item, and then press ENTER. • You can select "Color Temp.", "Black", "Fine Motion Advanced", "3D-Y/C", "Monochrome", "Film Mode" or "Range of OPC". 4 Press a/b (or c/d) to select the desired parameter. • See the table for the selectable parameters. 5 Press MENU to exit. Color Temperature For a better white balance, use color temperature correction. Selected item Description High Mid-High Middle Mid-Low Low White with Bluish tone White with Reddish tone Black Changes the viewing depth by automatically adjusting the dark portion of an image for easier viewing. Selected item On Off Description For high detail in black portions No adjustment Fine Motion Advanced Use Fine Motion Advanced to view fast-action video more clearly. Selected item Description On For obtaining a clearer image Off Normal image NOTE • Fine Motion Advanced may cause image noise. If this occurs turn the function "Off". 3D-Y/C Provides high quality images with minimal dot crawl and cross color noise. Selected item Description Standard Normal adjustment Fast For moving images Slow For still images NOTE • 3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable). Monochrome For viewing a video in monochrome. Selected item On Off Description For viewing in monochrome Normal color Film Mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. Selected item On Off Description Detects, analyzes, converts film source Normal viewing mode Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of f16. Selected item Max. Min. Description f15 through e16 f16 through e15 NOTE • The range of OPC settings are active only when the OPC is set to On. • The maximum setting cannot be set to a smaller number than the minimum setting. • The minimum setting cannot be set to a bigger number than the maximum setting. • Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. 28