Sharp LC-60LE810UN LC-40LE810UN LC-46LE810UN LC-52LE810UN LC-60LE810UN - Page 51
RS-232C Port Specifications, PC control of the TV, Communication conditions, Communication procedure - error code
UPC - 074000372580
View all Sharp LC-60LE810UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Using a PC RS-232C Port Specifications ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. ■ Command format Eight ASCII codes e CR C1 C2 C3 C4 P1 P2 P3 P4 • This operation system should be used by a person who is accustomed to using computers. ■ Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication conditions. The TV's communication settings are as follows: Baud rate: Data length: Parity bit: Stop bit: Flow control: 9,600 bps 8 bits None 1 bit None ■ Communication procedure Send the control commands from the PC via the RS232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command. Command 4-digits Parameter 4-digits Return code Command 4-digits: Command. The text of four characters. Parameter 4-digits: Parameter 0-9, x, blank, ? ■ Parameter Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4 values are input for the parameter.) When the input parameter is not within an adjustable range, "ERR" returns. (Refer to "Response code format".) Any numerical value can replace the "x" on the table. 0 0009 a30 When "?" is input for some commands, the present setting ? value responds. ???? ■ Response code format Normal response OK Return code (0DH) Problem response (communication error or incorrect command) ERR Return code (0DH) ■ Command table • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND POWER ON COMMAND SETTING R S P W POWER SETTING P OWR INPUT SELECTION TOGGLE TV INPUT1-7 AV MODE SELECTION I TGD I TVD I AVD A VMD VOLUME POSITION VIEW MODE VOLM H-POSITION H P O S V-POSITION V P O S CLOCK CLCK PHASE PHSE WI DE MUTE SURROUND AUDIO SELECTION SLEEP TIMER CHANNEL DIRECT CHANNEL (ANALOG) DIRECT CHANNEL (DIGITAL) MU T E ACSU ACHA OF TM DCCH DA2P DC 2 U DC2 L DC1 0 DC1 1 CH UP CHUP CH DOWN C H D W CC CLCP PARAMETER 0 _ _ _ Off 1 _ _ _ On 0 _ _ _ Power Off 1 _ _ _ Power On x _ _ _ (Toggle) 0___ * _ _ _ Input terminal number (1-7) * _ _ _ 0: (Toggle), 1: STANDARD, 2: MOVIE, 3: GAME, 4: USER, 5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC, 8: x.v. Color, 100: AUTO * * _ _ Volume (0-60 Only PC mode. (0-180) * * * _ Only PC mode. (0-40) * _ _ _ 0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV] 3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC] 6: Zoom [PC], 7: Stretch [PC], 8: Dot by Dot [PC] [AV], 9: Full Screen [AV] 10: Auto [Netflix], 11: Original [Netflix] * _ _ _ 0: (Toggle), 1: On, 2: Off * _ _ _ 0: (Toggle), 1: On, 2: Off x _ _ _ (Toggle) * _ _ _ 0: Off, 1: OFF TIMER - 30 MIN., 2: OFF TIMER - 60 MIN., 3: OFF TIMER - 90 MIN., 4: OFF TIMER - 120 MIN. * * * _ The channel number of TV (1-135) * * * * (0100-9999) * * * _ (1-999) * * * _ (0-999) * * * * (0-9999) * * * * (0-6383) x _ _ _ The channel number of TV +1 x _ _ _ The channel number of TV -1 x _ _ _ (Toggle) CONTROL CONTENTS The Power On command rejected. The Power On command accepted. It shifts to standby. Power On It input-switches by the toggle. (It is the same as an input change key) It input-switches to TV. (A channel remains as it is. (Last memory)) It input-switches to INPUT1~INPUT7. Although it can choose now, it is toggle operation in inside. The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen. 0: Although it can choose now, it is toggle operation in inside. 1: Only available when 4:3 signal is being input. 5, 6: Only available when 4:3 signal is being input. 8: [PC] Available except when UXGA is being input. [AV] Only available when 1080i/p is being input. 9: Only available when 720p is being input. An input change is included if it is not TV display. In Air, 2-69ch is effective. In Cable, 1-135ch is effective. DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit) DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel) DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel) DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000) DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000) If it is not TV display, it will input-switch to TV. (same function as CHU) If it is not TV display, it will input-switch to TV. (same function as CHV) Toggle operation of a closed caption. • If an underbar (_) appears in the parameter column, enter a space. • If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. • Any numerical value can replace the "x" on the table. 49