Sharp LC-70LE650U Operation Manual - Page 43

Using AQUOS LINK Device Operation Panel You can use the device operation panel to control playback operations. Press a/b/c/d to select the desired operation. NOTE • This function works only when AQUOS LINKcompatible equipment with the Device Operation Panel function is connected. Play from Rec. List This function allows you to display the title list for the connected equipment and to play back the title you want to enjoy. Before using this function. Power on the AQUOS LINK-compatible equipment, and select the appropriate external input. Select the title with a/b/c/d, and then press d to start playback. NOTE • This function works only when AQUOS LINKcompatible equipment is connected. Show Start Menu You can call up a setup menu from the connected AQUOS LINK-compatible equipment. NOTE • Depending on the status of the equipment (recording or in standby mode, etc), the setup menu will not be displayed. • The setup menu will not be displayed with the player BD-HP20U currently available. Change Media of Device You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. • The Media type toggles each time you press ENTER in "Change Media of Device". Link Booking (Rec. Book) You can call up the AQUOS LINK-compatible recorder's EPG and preset timer recordings using the TV's remote control. Select the program on the recorder's EPG. • You can use a/b/c/d, ENTER, RETURN, EXIT and the colored buttons. NOTE • This function works only when an AQUOS LINKcompatible recorder is connected. • Refer to the operation manual of the recorder for details. Change Audio Output Device You can select to listen to the TV sound only from the AQUOS LINK-compatible audio system. By AQUOS audio SP: The sound from the TV speaker is muted and only the sound from the AQUOS LINK-compatible audio system is audible. • You can use VOL+/- and MUTE. By AQUOS SP: The sound is output from the TV speaker. Change Surround Mode You can manually change the AQUOS AUDIO speaker system's sound mode. The sound mode changes each time you press ENTER. • Refer to the operation manual of the AQUOS LINK- compatible audio system for details. HDMI Device Selection If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. Press a/b to select the desired device from a list of connected HDMI devices, and then press ENTER. AQUOS Link Setup You can also display the AQUOS LINK Setup screen from the Link Operation Menu. Start/Stop Recording You can also use the Link Operation Menu for recording on the connected AQUOS LINKcompatible equipment. • You can also start recording by pressing (REC on the remote control unit. Using a Smartphone with the TV This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link (MHLTM ) using an MHL cable. To connect the TV to your MHL-compatible smartphone, be sure to use an MHL cable (commercially available). • You can view pictures and video on a large screen. • You can play back music files. MHL cable Back panel vertical inputs NOTE • An MHL-compatible portable device is required to use this function. Connect the device to the HDMI IN 4 terminal. • This product incorporates MHL 1. ■ Auto Power On When an MHL-compatible device is connected to the TV, the TV turns on automatically. • This function operates when "AQUOS LINK Control" is set to "On". (See page 40.) ■ Auto Input Selection When an MHL-compatible device is connected while the TV is on, the input mode is selected automatically. • This function operates when "AQUOS LINK Control" is set to "On". (See page 40.) ■ Operation Using the Remote Control The remote control of the TV can be used to operate a portable device. • a/b/c/d, ENTER, EXIT, 0-9, • (DOT), ENT, etc. • The operations vary depending on the connected equipment and content being viewed. 41