Sharp LC19SB15U LC-19SB15U LC-19SB25U LC-19SB25U-W Operation Manual - Page 24
Antenna Setup Digital
UPC - 940356306817
View all Sharp LC19SB15U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Basic adjustment settings Channel memory setting 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select "CH Setup", and then press ENTER. 3 Press a/b to select "CH Memory", and then press ENTER. 4 Press ENTER. 5 When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. 2 Press c/d to select "On", and then press ENTER. • On: Skips channels. (Channel selection disabled using CH r/s.) • Off: Does not skip channels. (Channel selection enabled using CH r/s.) When viewing DIGITAL broadcasts: 1 Press a/b to select the channel to skip, and then press ENTER to select "ADD" or "ERASE". • ERASE: Skips channels. (Channel selection disabled using CH r/s.) • ADD: Does not skip channels. (Channel selection enabled using CH r/s.) 6 Press MENU to exit. • Make sure what kind of connection is made with your TV. Antenna Setup Digital In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select "CH Setup", and then press ENTER. 3 Press a/b to select "Antenna Setup Digital", and then press ENTER. 4 Press a/b to select "SIGNAL STRENGTH". • The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. SIGNAL STRENGTH CHANNEL STRENGTH Adjust the antenna until the level is 60 or higher str 5 Press MENU to exit. • This "SIGNAL STRENGTH" display is a standard to decide the best direction of the antenna, and cannot to guarantee image/voice. Channel Strength 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select "CH Setup", and then press ENTER. 3 Press a/b to select "Antenna Setup Digital", and then press ENTER. 4 Press a/b to select "CHANNEL STRENGTH", and then press ENTER. • Input the 2-digit channel number to check the strength of the selected channel. • Make sure the appropriate signal strength of each channel received is obtained. SIGNAL STRENGTH CHANNEL STRENGTH 5 Press MENU to exit. 24