Sharp LC26D40U LC-26D40U LC-32D40U Operation Manual - Page 14

Watching TV Simple operations for watching a TV program POWER POWER indicator TV status indicator (POWER) ON Lighting (Green) OFF/Standby Lighting (Red) TV POWER (On/Standby) Preparation Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 8.) 2. Connect the antenna cable to the TV. (See page 13.) 3. Plug in the AC cord to the AC outlet. (See page 7.) Turning on the power Press POWER on the TV, or TV POWER on the remote control. • POWER indicator (Green): The TV is on. ("PLEASE WAIT" will appear for a few seconds on the screen.) NOTE • The LANGUAGE setup menu will appear automatically when MENU is pressed for the first time. (See below.) Turning off the power Press POWER on the TV, or TV POWER on the remote control. • The TV enters standby mode and the image on the screen disappears. • The POWER indicator on the TV changes to Red. NOTE • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet. • Weak electric power is still consumed even when POWER is turned off. • If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. Initial setup Language setting When you press MENU for the first time, the LANGUAGE setup menu will appear automatically. Select from among 3 languages: English, French and Spanish. 1 Press / to select the desired language from the list. SETUP LANGUAGE ENGLISH ENGLISH/FRANÇAIS/ESPAÑOL CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST 14