Sharp LC26D43U LC-26D42U-W LC-26D43U Operation Manual - Page 19

Watching TV Simple button operations for changing channels You can change channels in several ways. • When selecting a 1-digit channel number, it is not necessary to press 0 before the number. • When you enter 0-9 only, channel selection will be made if there is no operation within a few seconds. To select a 3-digit channel number (e. g., Channel 115): Press 1s1s5sENT To select a 4-digit channel number (e. g., Channel 22.1): Press 2 s2s • (DOT) s1sENT • When you enter 0-9 only, channel selection will be made if there is no operation within a few seconds. • If you push "0" by itself, nothing will happen. • Complete the above steps within a few seconds. • When you enter 0-9 and • (DOT), channel selection will be made if there is no operation within a few seconds. Method 1 Using CH r/s on the remote control unit or on the TV. Method 2 1 Press FLASHBACK to switch to the previously tuned channel. 2 Press FLASHBACK again to switch back to the currently tuned channel. • FLASHBACK will not work if no channel has been changed after the TV is turned on. Method 3 Using remote control buttons 0-9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL. To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5sENT Displaying the receiving channel information 1 Press DISPLAY once. The display appears as shown on below. If the viewing channel is a digital channel, the information of channel number, audio service type, broadcast station, program information and V-Chip rating will appear. Cable DIGITAL 98.3 Audio: STEREO CC:(Off) Ratings:NONE Cable ANALOG 7 Audio:MONO CC:-- Ratings:NONE (While viewing digital (While viewing analog channel) channel) 2 Press DISPLAY again to return to normal screen. • The channel information will disappear if there is no operation within a few seconds. 18