Sharp LC42D72U LC-42D72U Operation Manual - Page 32
Using external equipment
UPC - 074000370203
View all Sharp LC42D72U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Using external equipment Displaying an external equipment image To view external source images, select the input source from INPUT on the remote control unit or on the TV. Input Select If the image does not come in clearly from the external equipment connected to INPUT 1, INPUT 2 or INPUT 6 (DVI), you may need to change the input signal type setting on the "Input Select" menu. Selecting input signal type (INPUT 1, INPUT 2) 1 Press MENU to display the MENU screen, and then press c/d to select "Option". 2 Press a/b to select "Input Select", and then press ENTER. Option Audio Only Digital Noise Reduction [Off] Input Select [Auto] Output Select [Fixed] 1 Press INPUT. • A list of selectable sources appears. 3 Press a/b to select the signal type you want to set, and then press ENTER. • If the selected signal type is incorrect, images are not displayed or displayed without any color. Auto INPUT SOURCE TV COMPONENT VIDEO INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 4 Press MENU to exit. • The setting is stored and can be selected on the "INPUT SOURCE" menu. INPUT6 NOTE • Refer to your external equipment operation manual for the signal type. Press INPUT again to select the input • If you set INPUT 1 or 2 to Auto, the TV will automatically 2 source. select the input signal. • Check the operation manual of the external equipment for • An image from the selected source automatically displays. • Each time INPUT is pressed, the input source the signal type. • Setting INPUT 1 or 2 signal selection to "Auto" when other equipment is connected will result in the following toggles. connection priority. • You can also select the input source by pressing a/b. • If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the INPUT 1 or 2: 1 COMPONENT VIDEO 2 VIDEO equipment beforehand. NOTE • See pages 13 to 15 for external equipment connection. 30