Sharp M20X PG-M20X Operation Manual - Page 80
on INPUT 1 RGB, Yes Y Cable
UPC - 074000358355
View all Sharp M20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Problem Power cannot be turned on or off using the POWER button on the projector Picture is green on INPUT 1 COMPONENT Picture is pink (no green) on INPUT 1 RGB Picture is dark Picture is too bright and whitish The VOLUME buttons on the projector do not work Check • The Keylock level is set. If the Keylock level is set to Level B, all the buttons are locked. If the Keylock level is set to Level A, only the INPUT, VOLUME and AV MUTE buttons work. • Change the input signal type setting. • The LAMP REPLACEMENT indicator is blinking in red. Replace the lamp. • "Monitor Out" is set to "Disable" when the RGB monitor loop-out adaptor is connected to Monitor Out. • "Monitor Out" is set to "Yes (Y Cable)" when the RGB monitor loop-out adaptor is not connected to Monitor Out. • Picture adjustments are incorrectly set. The VOLUME buttons do not work when: (try the VOL+/- on the remote control) • when the menu is displayed • when the lens menu is displayed • when Pict in Pict is working • during Enlarge (More than double size) • a dot by dot screen resolution larger the panel resolution. Page 60 40 72·73 58 58 40 - Appendix -77