Sharp MX-5001N MX-4100N MX-4101N MX-5001N Operation Manual Suite - Page 884

SPECIFICATIONS Machine specifications / copier specifications (Continued) Paper sizes: 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, envelopes, A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR (Includes automatic paper size detection function. Entry of paper sizes up to 11-5/8" x 17" (297 mm x 432 mm) is possible.) Bypass tray Paper weights: Thin paper (15 lbs. to 16 lbs. (55 g/m2 to 59 g/m2)), plain paper (16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)), heavy paper (28 lbs. bond to 140 lbs. index (106 g/m2 to 256 g/m2)), envelopes (20 lbs. to 24 lbs. (75 g/m2 to 90 g/m2)) Paper capacity: Standard paper 100 sheets Paper types: SHARP-recommended plain paper, recycled paper, colored paper, heavy paper, thin paper, transparency film, envelopes (Monarch, Com-10, DL, C5) Duplex module Paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"R, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR Paper weight: Plain paper (16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)), heavy paper (28 lbs. bond to 110 lbs. index (106 g/m2 to 209 g/m2)) Paper types: SHARP-recommended plain paper, recycled paper, colored paper, and heavy paper Output method: Face-down output (12" x 18" and A3W paper can be output to right tray, finisher, or saddle stitch finisher) Output tray (Center tray)*1 Output capacity: 500 sheets (using SHARP-recommended 8-1/2" x 11" or A4 paper) (The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper.) Tray full sensor: Yes Interface port LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T USB connectivity: Type A connector supports USB 2.0 (Hi speed)*2 Compatibility requirements of USB memory Memory capacity : Max. 32 GB Disk Format : FAT32 only Type B connector supports USB 2.0 (Hi speed) Required power supply AC 120 V ±10% 60 Hz Power consumption MX-4100N/MX4101N: 1.44kW MX-5001N: 1.92kW Typical electricity consumption MX-4100N: 12.95 kWh/week MX-4101N: 13.68 kWh/week MX-5001N: 13.89 kWh/week Dimensions MX-4100N: 25-25/64" (W) x 27-3/8" (D) x 37-25/64" (H) (645 mm (W) x 695 mm (D) x 950 mm (H)) MX-4101N/5001N: 25-25/64" (W) x 27-3/8" (D) x 37-51/64" (H) (645 mm (W) x 695 mm (D) x 960 mm (H)) Weight MX-4100N: Approx. 262.4 lbs. (119 kg) MX-4101N/5001N: Approx. 282.2 lbs. (128 kg) Overall dimensions 39-11/64" (W) x 27-3/8" (D) (995 mm (W) x 695 mm (D)) (when bypass tray is extended) *1 Output tray (Center tray) cannot be used when the finisher or saddle stitch finisher is installed. *2 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors); however, the connectors cannot be used simultaneously. Only one of the connectors can be used. 7