Sharp MX-C312 Operation Guide - Page 157

BEFORE USING THE MACHINE MACHINE SPECIFICATIONS / COPIER SPECIFICATIONS Name Digital Full Color Multifunctional System MX-C312 Type Desktop Display 7.0 inch color touch panel LCD Photoconductive type OPC drum Printing method Electrophotographic system (laser) Developer system Dry-type two-component magnetic brush development Fusing system Heat rollers Scanning resolution Document glass Reversing single pass feeder (automatic document feeder) Black and white scanning: 600 x 300 dpi, 600 x 600 dpi (factory default values) Color scanning: 600 x 300 dpi, 600 x 600 dpi (factory default values) Black and white scanning: 600 x 300 dpi (factory default values), 600 x 600 dpi Color scanning: 600 x 300 dpi (factory default values), 600 x 600 dpi Printing resolution 600 x 600 dpi Scanning gradation 256 levels Printing gradation Equivalent to 256 levels Original sizes / types Max. 8-1/2" x 11" (A4) / sheets, bound documents Copy sizes Maximum: 8-1/2" x 11" (A4) Minimum: 5-1/4" x 5-3/4" (A5) Print margins Leading edge / trailing edge: total 21/64" (8 mm) or less, near edge / far edge: total 21/64" (8 mm) or less Warm-up time 90 seconds or less (At room temperature of 73.4°F (23°C) and rated voltage) First-copy time* Color copy time: 8.9 seconds or less Black and white copy time: 8.0 seconds or less (Portrait feeding of 8-1/2" x 11" (A4) sheets from 1st paper tray, without auto color selection and auto color mode.) Copy ratios Variable: 50% to 200% in increments of 1%, total 151 increments Fixed presets: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141% and 200% for AB sizes. 50%, 64%, 77%, 100%, 129% and 200% for inch sizes; Two reduction ratios and two enlargement ratios can be stored. Continuous copy 999 copies * First copy out time is measured with original on the document glass in full ready condition with fuser at operating temperature and mirror motor at operating speed in each of black and white mode and color mode, actual time may vary based on environment conditions. 1-116 Contents