Sharp MX-M1100 Software Setup Guide - Page 4

1 BEFORE INSTALLING THE SOFTWARE This chapter mainly describes the software programs that allow you to use the printer functions of the machine, the CD-ROMs that contain the software, and the pages where the installation procedures can be found. CD-ROMS AND SOFTWARE The software that can be used with the machine is on the CD-ROMs that accompany the expansion kits. Before installing the software, make sure that your computer and the machine meet the system requirements described in "VERIFYING SYSTEM REQUIREMENTS" (page 5). SOFTWARE CD-ROM THAT ACCOMPANIES THE PRINTER EXPANSION KIT The "Software CD-ROM" that accompanies the printer expansion kit contains the printer driver and other software. The "Software CD-ROM" consists of 2 discs. For users of Windows NT 4.0 The CD-ROM does not include software for Windows NT 4.0. Contact your dealer or nearest authorized service representative if you want software for Windows NT 4.0. Disc 1 Software for Windows • Printer driver These allow the machine to be used as a printer. - PCL6 and PCL5e printer driver The machine supports the Hewlett-Packard PCL6 and PCL5e printer control languages. It is recommended that you use the PCL6 printer driver. If you have a problem printing from older software using the PCL6 printer driver, use the PCL5e printer driver. - PS printer driver The PS printer driver supports the PostScript 3 page description language developed by Adobe Systems Incorporated. - PPD driver The PPD driver enables the machine to use the standard Windows PS printer driver. ☞ WHEN THE MACHINE IS CONNECTED TO A NETWORK (page 8) ☞ WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 15) • Printer Status Monitor (can only be used when the machine is connected to a network) This allows you to monitor the status of the machine on your computer screen. ☞ INSTALLING THE PRINTER STATUS MONITOR (page 26) 2