Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 40

CONVENIENT COPY FUNCTIONS STAPLE SORT (when the finisher (MX-FN13) is installed) This function collates the copies, staples each set, and delivers the sets to the offset tray. The staple sort function can only be used when a finisher is installed. Stapling position Top left corner Portrait orientation Available paper sizes: 8-1/2" x 11" (A4, B5) Stapling capacity: For each size, up to 50 sheets can be stapled. Landscape orientation Available paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11" R (A3, B4, A4R, B5R) Stapling capacity: 11" x 17", 8-1/2" x 14", 8-1/2" x 13" (A3, B4) For each size, up to 30 sheets can be stapled. 8-1/2" x 11"R, (A4R, B5R) For each size, up to 50 sheets can be stapled. ORIENTATION OF THE ORIGINAL AND STAPLING POSITIONS Using the RSPF Insert the originals face up. Using the document glass Place each original face down. Stapling position Stapling position When copying 8-1/2" x 14" or 11" x 17" (B4 or A3) vertically oriented originals, the copies will be stapled at the position shown below. Stapling position Stapling position RSPF Document glass • When using letterhead paper in the staple sort, load the paper with the letterhead to Note the front or to the right as shown in the diagram. SHARP SHARP 38 • When the staple sort is used, the automatic original image rotation function does not operate. • Different sized originals cannot be copied on the corresponding sizes of paper. • The staple sort function cannot be used if disabled in the administrator settings. (See "6. SYSTEM SETTINGS (ADMINISTRATOR).) • The offset function (p.36) cannot be used.