Sharp MX-M850 Maintenance Manual - Page 19

REMOVING MISFEEDS Detailed procedures for removing misfeeds are explained in this section. Use these procedures together with the information screen. MISFEED LOCATIONS Misfeeds can be detected in the locations below. In this manual, procedures for removing misfeeds are explained by device. FINISHER (FOR MX-M850) / SADDLE STITCH FINISHER ☞ page 24 FINISHER ☞ page 18 SADDLE UNIT ☞ page 21 BYPASS TRAY (MX-MFX1) / LARGE CAPACITY TRAY ☞ page 43 THE MACHINE ☞ page 33 INSERTER ☞ page 30 FOLDING UNIT ☞ page 28 BYPASS TRAY (MX-MFX2) / LARGE CAPACITY TRAYS ☞ page 39 • Do not damage or touch the transfer belt while removing misfed paper. • Be careful not to tear the misfed paper during removal. • A misfeed may occur deep inside a compartment, so check the entire compartment carefully. • If the paper tears, be sure to remove all pieces from the machine. • After you have finished removing a misfeed, be sure to replace any covers or devices that were moved during misfeed removal back in their original positions. 17