Sharp MX-M850 Maintenance Manual - Page 28
Rotate the R9 knob in the direction
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
REMOVING MISFEEDS 14 Push the R3 lever down in the direction of the arrow. 18 Grasp the R10 lever (R8 lever on the finisher) and pull out the unit. Gently pull out the unit until it stops. 15 Move the R7 lever in the direction of the arrow. 19 Remove the misfed paper. 16 Remove the misfed paper. When released, the R7 lever automatically returns to its original position. After removing the paper, return the R3 lever to its original position. If you are using the finisher (for the MX-M850), go to step 24. 20 Open the R11 lever in the direction of the arrow. If you are using the finisher (for the MX-M850), go to step 18. 17 Rotate the R9 knob in the direction of the arrow. 21 Remove the misfed paper. After removing the paper, return the R11 lever to its original position. Be sure to turn the R9 knob before performing step 18. If you perform step 18 without turning the knobs, the paper may tear and pieces may remain in the machine. 26