Sharp PG-A10S Operation Manual - Page 29
Projection from behind the Screen, Projection Using a Mirror, Ceiling-mount Setup - ceiling mount
UPC - 074000358850
View all Sharp PG-A10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Projecting a Reversed/Inverted Image Projection from behind the Screen I Place a translucent screen between the projector and the audience. I Reverse the image by setting "Rear" in the "PRJ Mode" menu. See page 50 for use of this function. When using the default setting. MOn-screen Display Connections and Setup Projection Using a Mirror I Place a mirror (normal flat type) in front of the lens. The image is reversed. Info • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount Setup I It is recommended that you use the optional Sharp ceilingmount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately.) • AN-PGCM95 ceiling-mount bracket, its AN-EP101B extension tube and AN-JT299 universal bracket, adaptor for non-level ceiling installation (for U.S.A.). • BB-A10T ceiling adaptor, its BB-NVHOLDER280, BBNVHOLDER550, BB-NVHOLDER900 ceiling mount systems (for GERMANY). • AN-A10T ceiling-mount bracket, its AN-TK201 and ANTK202 extension tubes (for countries other than the U.S.A. and GERMANY). I Be sure to adjust the position of the projector to match the distance (H) from the lens center position (see page 24) to the lower edge of the image, when mounting the projector on the ceiling. I Invert the image by setting "Ceiling+Front" in the "PRJ Mode" menu. See page 50 for use of this function. A10X_A10S#E_Print#p21_25.p65 25 When using the default setting. MOn-screen Display The image is inverted. 25 03.2.4, 2:02 PM