Sharp PG-A10S Operation Manual - Page 44
Picture Display Mode - pg a10x
UPC - 074000358850
View all Sharp PG-A10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "DOT BY DOT", "BORDER" or "STRETCH" image. Switching the Picture Display Mode Press . • Pressing changes the display as shown on pages 40 and 41. • To return to the standard image, press "RESIZE" is displayed on the screen. while UNDO button RESIZE button COMPUTER 4:3 aspect ratio Other aspect ratios SVGA (800 × 600) XGA (1024 × 768) SXGA (1280 × 960) SXGA+ (1400 × 1050) SXGA (1280 × 1024) 1280 × 720 NORMAL PG-A10X PG-A10S 1024 × 768 800 × 600 960 × 768 750 × 600 - - DOT BY DOT PG-A10X PG-A10S 800 × 600 - - 1024 × 768 1280 × 960 1280 × 960 1400 × 1050 1400 × 1050 1280 × 1024 1280 × 1024 - - BORDER PG-A10X PG-A10S 768 × 576 600 × 450 720 × 576 562 × 450 - - STRETCH PG-A10X PG-A10S 1024 × 576 800 × 450 960 × 576 750 × 450 1024 × 576 800 × 450 Input Signal Computer PG-A10X PG-A10S Image type Resolution Resolution lower than lower than XGA SVGA 4:3 aspect ratio Output screen image NORMAL Projects a full screen image while maintaining the aspect ratio. DOT BY DOT Projects the original resolution signal of the image. BORDER STRETCH Projects 4:3 image fully Projects 16:9 image in STRETCH (the following evenly over entire screen column) image. (top/bottom blank bands). * * * * * XGA SVGA 4:3 aspect ratio * * Resolution Resolution higher than higher than XGA SVGA 4:3 aspect ratio * * SXGA (1280 × 1024) 5:4 aspect ratio * 1280 × 720 16:9 aspect ratio * Mode for projecting an image with the original aspect ratio without cutting any portions. : Cutout area on which images cannot be projected. : Area where the signals are off screen. 40 A10X_A10S#E_Print#p40_50.p65 40 03.2.4, 3:02 PM