Sharp PG-C45XL PG-C45X Operation Manual - Page 22
Connecting the Projector to a Computer, Connecting to a Computer, Using the RGB Cable
View all Sharp PG-C45XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting the Projector to Other Devices Connecting the Projector to a Computer Connecting to a Computer Using the RGB Cable 1 Connect the projector to the computer using the supplied RGB cable. • Secure the connectors by tightening the thumbscrews. 2 To input audio signal, connect the projector to the computer using the supplied computer audio cable. Supplied accessories Notebook computer To RGB output terminal To audio output terminal RGB cable Computer audio cable Note • See page 93 "Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions not to work. • When connecting the projector to a computer in this way, select "RGB" for "Signal Type" in the "Picture" menu. See page 46. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized Projector Dealer or Service Center. • Depending on the computer you are using, an image may not be projected unless the signal output setting of the computer is switched to the external output. Refer to the computer operation manual for switching the computer signal output settings. 1 RGB cable 2 Computer audio cable Connecting the thumbscrew cables I Connect the thumbscrew cable making sure that it fits correctly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug. I Do not remove the ferrite core attached to the RGB cable. Ferrite core -18