Sharp PG-C45XL PG-C45X Operation Manual - Page 74
Automatic Power Off Function, Displaying the Remaining Lamp Life (Percentage), Checking the Remaining
View all Sharp PG-C45XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Selecting the Economy Mode Automatic Power Off Function When no input signal is detected for more than 15 minutes, the projector will automatically power off if set to "ON". The Auto Power Off function will be disabled when it has been set to "OFF". Select "Auto Power Off" in "Economy Mode" under the "Options (1)" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Note • When the Auto Power Off function is set to "ON", 5 minutes before the power turns off, the message "Power OFF in X min." will appear on the screen to indicate the remaining minutes. Displaying the Remaining Lamp Life (Percentage) Checking the Remaining Lamp Life (Percentage) This function allows you to check the remaining lamp life (percentage). Select the "Options (2)" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Note • It is recommended that the lamp be changed when the remaining lamp life becomes 6%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center. • The table at the right indicates rough estimates in the case of using only in each mode shown. Remaining lamp life changes within the range of the values shown depending on the frequency at which "Power Save" is switched "ON" and "OFF" (see page 69). -70 Remaining Lamp Life (Percentage) Used with only "ON" on "Power Save" (Low power mode) Used with only "OFF" on "Power Save" (Standard mode) Remaining lamp life 100% 6% 2,000 hours 133 hours 1,500 hours 100 hours