Sharp PN-E603 PN-E603 PN-E703 Quick Start Guide - Page 8

Connections Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems. 1 Power cord (Supplied) 1. AC input terminal 8 2. DisplayPort input terminal 3. DisplayPort output terminal 9 4. DVI-I input terminal 5. DVI-D output terminal 10 6. Audio1 input terminal 7. Audio2 input terminal 11 8. LAN terminal 12 9. RS-232C output terminal 10. RS-232C input terminal 13 11. Audio output terminal 12. PC/AV D-sub input terminal 13. PC/AV HDMI1 input terminal 14 14. PC/AV HDMI2 input terminal For power outlet 23 4 5 67 TIPS • Set the audio input terminal used for each input mode in AUDIO SELECT on the SETUP menu. The factory settings are shown below. Input mode DVI-I DisplayPort HDMI1[PC], HDMI1[AV], HDMI2[PC], HDMI2[AV] D-SUB[RGB], D-SUB[COMPONENT], D-SUB[VIDEO] Audio input terminal (Factory setting) Audio1 input terminal DisplayPort input terminal PC/AV HDMI input terminal Audio2 input terminal • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • DisplayPort is a registered trademark of Video Electronics Standards Association. E6