Sharp PN-E803 PN-E803 Operation Manual - Page 56

Specifications

Get Sharp PN-E803 PDF manuals and user guides View all Sharp PN-E803 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Specifications nProduct Specifications Model PN-E803 LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.923 mm (H) × 0.923 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 69-3/4 (W) x 39-1/4 (H) (1771.2 x 996.3) Computer input signal Sync signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω], DisplayPort 1.1a Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*1, Composite sync (TTL: positive/negative)*1 Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV HDMI x 2 Mini D-sub 15 pin, 3 rows x 1 PC DisplayPort x 1 DVI-I 29 pin (HDCP compatible) x 1 Audio 3.5 mm mini stereo jack x 2 Serial (RS-232C) D-sub 9 pin x 1 Output terminals PC DisplayPort x 1 DVI-D 24 pin (HDCP compatible) x 1 Audio 3.5 mm mini stereo jack x 1 Serial (RS-232C) D-sub 9 pin x 1 LAN terminal 10 BASE-T/100 BASE-TX Speaker output 10 W + 10 W Power requirement AC 100 - 240 V, 3.2 A, 50/60 Hz Operating temperature *2 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption 280 W (1.0 W / 1.4 W) (Input signal waiting mode *3 *4 / standby mode *5) Dimensions (excluding protrusions) inch (mm) Approx. 72-13/16 (W) x 3-3/4 (D) x 42-3/16 (H) (1850 x 96 x 1072) Weight lbs. (kg) Approx. 125.7 (57) *1 D-Sub input terminal only. *2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *3 When AUTO INPUT CHANGE is set to OFF. *4 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W. (during PC input) *5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. E 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
56
E
Specifications
n
Product Specifications
Model
PN-E803
LCD component
80" Class [80 inch (203.2cm) diagonal] TFT LCD
Max. resolution
(pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.923 mm (H) × 0.923 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area
inch (mm)
69-3/4 (W) x 39-1/4 (H) (1771.2 x 996.3)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω],
DisplayPort 1.1a
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*
1
,
Composite sync (TTL: positive/negative)*
1
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
PC/AV
HDMI x 2
Mini D-sub 15 pin, 3 rows x 1
PC
DisplayPort x 1
DVI-I 29 pin (HDCP compatible) x 1
Audio
3.5 mm mini stereo jack x 2
Serial (RS-232C)
D-sub 9 pin x 1
Output terminals
PC
DisplayPort x 1
DVI-D 24 pin (HDCP compatible) x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
LAN terminal
10 BASE-T/100 BASE-TX
Speaker output
10 W + 10 W
Power requirement
AC 100 - 240 V,
3.2
A, 50/60 Hz
Operating temperature
*
2
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption
(Input signal waiting mode
*
3
*
4
/ standby mode
*
5
)
280 W (1.0 W / 1.4
W)
Dimensions (excluding protrusions)
inch (mm)
Approx. 72-13/16 (W) x 3-3/4 (D) x 42-3/16 (H) (1850 x 96 x 1072)
Weight
lbs. (kg)
Approx.
125.7 (57)
*1
D-Sub input terminal only.
*2
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*3
When AUTO INPUT CHANGE is set to OFF.
*4
When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W. (during PC input)
*5
When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.