Sharp PN-K322B Setup Manual - Page 6

MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • To install on a stand (commercially available) or on a wall, or to remove or move the monitor, consult your dealer. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. • Use the monitor with the surface perpendicular to a level surface. If you are tilting the monitor without using the supplied stand, the monitor may be tilted up to 25 degrees upward or 20 degrees downward. • This monitor should be used at an ambient temperature between 41°F (5°C) and 95°F (35°C). Provide enough space around the monitor to prevent heat from accumulating inside. For the monitor in landscape orientation 7-7/8 [20] Unit: inch [cm] 1/8 [3.5] • When installing the monitor in landscape orientation, you can attach the supplied horizontal sticker (Operation buttons) to the front. Horizontal sticker (Operation buttons) • Use the supplied vertical sticker when you install the monitor in portrait orientation. Attach the vertical sticker (Operation buttons) to the back or the front. • Back Vertical sticker (Operation buttons) • Front Vertical sticker (Blank) 2 2 [5] [5] 2 [5] For the monitor in portrait orientation 7-7/8 [20] Unit: inch [cm] 1/8 [3.5] Vertical sticker (Operation buttons) 2 2 [5] [5] Cover Sharp logo 2 [5] For the monitor on the supplied stand Unit: inch [cm] 2 2-47/64 2 [5] [69.3] [5] • If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 41°F (5°C) to 95°F (35°C), install a fan or take other measures to keep the ambient temperature within the required range. • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. • Do not place the monitor on a device which generates heat. Vertical sticker (Logo) Caution • Adhere to the following when installing the monitor in its portrait orientation. Failing to adhere to the following may cause malfunctions. - Install the monitor such that the operation buttons are located on the top side. - S et the MONITOR on the MONITOR menu to PORTRAIT. (See OPERATION MANUAL.) E4