Sharp PN-L603A Operation Manual - Page 9

Supplied Components If any component should be missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Cable clamp: 3  Cable clamp (insertion type): 2  Power cord: 1  Remote control unit battery (R-6 ("AA" size)): 2  CD-ROM (Utility Disk): 1  CD-ROM (Touch Display Link): 1  Setup Manual: 1  Touch pen: 1  Pen tip (for touch pen): 2  Tray: 1  USB cable: 1  Eraser: 1  Camera mount: 1  Camera screw (inch thread): 1  Tray mounting screws (M3) : 5  Cover SHARP logo: 1 Place this sticker onto the SHARP logo to cover the logo. * SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. System Requirements Computer OS CPU Memory Free space on hard drive PC/AT compatible computer with a USB 2.0 port and able to output a resolution of 1920 x 1080. (CD-ROM drive required for software installation.) Windows 7 (32-bit or 64-bit version), Windows 8 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version) Intel Celeron or AMD Sempron 1.6 GHz or faster Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended At least 2 GB At least 200 MB (free space separately required for data storage) To use a touch panel, the touch panel must be connected to the computer, and Touch Panel Settings Tool and Pen Software must be installed on the computer from the supplied CD-ROM. To install the software, see the manual for each. To use a touch panel with a computer connected to the bottom, connect to the USB 1 port. To use a touch panel with a computer connected to the side, connect to the USB 2 port. (Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.) 9E