Sharp QS-2770A QS-2770A/2760A/1760A Operation Manual - Page 7
Accumulation
View all Sharp QS-2770A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2) When the grand total mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in the grand total memory. To print and clear the count, press the g key. 3) The memory item counter will count the number of times that the g key has been pressed in the addi- a tion. Note: • Each time the key is used in the sub- traction, 1 will be subtracted from the count. • The count is printed when the memory is recalled. • Pressing of the g key clears the counter. "IC+" position - 1) The counter will count the number of times that the Q or FA has been pressed in addition and subtraction. Note: • The count is printed when the calculated result is obtained. • Pressing of the 0, 0, [7], AVG or MU key clears the counter. 2) When the grand total mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in the grand total memory. To print and clear the count, press the g key. 3) The memory item counter will count the number of times that the H or El key has been pressed in addition and subtraction. Note: • The count is printed when the memory is recalled. • Pressing of the g key clears the counter. "." position: Neutral, counter is turned off. Note: The counter has a maximum capacity of 3 digits (up to ±999). If the count exceeds the maximum, the counter will recount from zero. I FIRST FACTOR ACCUMULATION SELECTOR: (Only OS-2770A) "FE" position: The first factor is automatically added to or subtracted from the memory. A first factor means the first number in multiplication and division and each number is printed with "xI" and "÷ I" respectively. Ex. 2 x 3 x 5 ÷ 6 = 12 ÷ 7 x 9 = -56 x 4 x 0.5 = "•" position: Neutral 5