Sharp R-326FS R-326FS Microwave Operation Manual - Page 19

OTHER CONVENIENT FEATURES TIMER • Suppose you want to time a 3-minute long distance phone call. PROCEDURE 1 Touch TIMER pad and number pad 1 . 1 2 Enter time. 300 3 Touch TIMER pad again. MULTIPLE SEQUENCE COOKING Your oven can be programmed for up to 4 automatic cooking sequences, switching from one power level setting to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your oven can do this automatically. • Suppose you want to cook roast beef for 5 minutes at 100% and then continue to cook for 30 minutes at 50%. PROCEDURE 1 First enter cooking time. Then touch POWER LEVEL pad once for 100% power. 500 x 1 2 Then enter second cooking time. Touch POWER LEVEL pad 6 times for 50% power. 3000 x 6 3 Touch START pad. CHILD LOCK The Child Lock prevents unwanted oven operation such as by small children. The oven can be set so that the control panel is deactivated or locked. To set, touch TIMER, the number 4 and then touch the START pad and hold for three seconds. Should a pad be touched, CHILD LOCK ON will appear in the display. To cancel, touch TIMER and STOP/CLEAR pads. AUDIBLE SIGNAL ELIMINATION If you wish to have the oven operate with no audible signals, touch TIMER, the number 5 and then touch the START pad and hold for three seconds. To cancel and restore the audible signal, touch TIMER, the number 5 and then touch the STOP/CLEAR pad. MINUTE PLUS Minute Plus allows you to cook for a minute at 100% by simply touching the MINUTE PLUS pad. You can also extend cooking time in multiples of 1 minute by repeatedly touching the MINUTE PLUS pad during manual cooking. • Suppose you want to heat a cup of soup for one minute. PROCEDURE 1 Touch MINUTE PLUS pad. NOTE: 1. To use Minute Plus, touch pad within 3 minutes after cooking, closing the door or touching the STOP/ CLEAR pad. 2. Minute Plus cannot be used with Special Features. NOTE: 1. If POWER LEVEL pad is touched once, HIGH will be displayed. 2. If 100% is selected as the final sequence, it is not necessary to touch the POWER LEVEL pad. 3. If you wish to know power level, simply touch the POWER LEVEL pad. As long as your finger is touching the POWER LEVEL pad, the power level will be displayed. 17