Sharp R-930AW R-930CS/AK/AW Microwave Operation Manual - Page 13
Manual Operation, Before Operating
UPC - 074000606043
View all Sharp R-930AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
BEFORE OPERATING MANUAL OPERATION * Before operating your new microwave oven make sure you read and understand this operation manual completely. * Before the oven can be used, follow these procedures: 1) Plug in the oven. Close the door. The display will say SHARP SIMPLY THE BEST PRESS CLEAR AND PRESS CLOCK. 2) Touch the STOP/CLEAR pad. will appear. 3) Touch CLOCK pad. TO SET THE CLOCK * Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.): Procedure 1. CLOCK Touch CLOCK pad. 2. 3. CLOCK Enter the correct time of day by touching the numbers in sequence. Touch CLOCK pad again. This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time. * If the electrical power supply to your microwave oven should be interrupted, the display will intermittently show SHARP SIMPLY THE BEST PRESS CLEAR AND PRESS CLOCK after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day. MICROWAVE COOKING Time Cooking Your oven can be programmed for 99 minutes 99 seconds (99.99). Always enter the seconds after the minutes, even if they are both zeros. * Suppose you want to cook for 5 minutes at 100%: Procedure 1. Enter cooking time. 2. START TOUCH ON Touch START pad. There are eleven preset power levels. Using lower power levels increases the cooking time which is recommended for foods such as cheese, milk and long slow cooking of meats. Consult cookbook or recipes for specific recommendations. Touch POWER LEVEL Pad Once, then Touch POWER LEVEL 9 8 7 6 5 4 3 2 1 0 Approximate Percentage of Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% Common Words for Power Levels High Medium High Medium Med. Low/Defrost Low * Suppose you want to defrost for 5 minutes at 30%: Procedure 1. Enter defrosting time. STOP/CLEAR 2. POWER LEVEL Enter power level. Touch the STOP/CLEAR pad to: 1. Erase if you make a mistake during programming. 2. Cancel kitchen timer. 3. Stop the oven temporarily during cooking. 4. Return the time of day to the display. 5. Cancel a program during cooking, touch twice. 3. START TOUCH ON Touch START pad. You can program up to 4 automatic cooking sequences. Follow directions on page 24. Note that POWER LEVEL must be entered first when programming multiple sequences. 11