Sharp R420E R-420E Microwave Operation Manual - Page 16

Compu Defrost, Manual Defrost

Page 16 highlights

SPECIAL FEATURES COMPU DEFROST CompuDefrost automatically defrosts all the foods shown in the CompuDefrost Chart on page 15. Round the weight to the nearest half pound. (Ex: if the steak's actual weight is 2.2 lb round to 2.0 lb If the steak's weight is 2.4 lb round to 2.5 lb.) To enter weight, touch the desired COMPU DEFROST pad for a 0.5 lb increase per touch. (Ex: touch four times for 2.0 lb.) • Suppose you want to defrost a 2.0 pound steak . PROCEDURE DISPLAY STEAKS/ 1 CHOPS x 4 2.0 LBS DEF HELP Quickly touch STEAK/CHOPS pad 4 times for 2.0 lb. The oven will start automatically. The oven will stop and directions will be displayed. Follow the indicated message. After the 1st stage, open the door, turn steak 2 over and shield any warm portions. Close the door. START Touch START pad. After the 2nd stage, open the door and shield 3 any warm portions. Close the door. START Touch START pad. 4 After defrost cycle ends, cover and let stand as indicated in chart below. NOTE: 1. If you attempt to enter more or less than the allowed weight as indicated in chart below, ERROR will appear in the display. 2. CompuDefrost can be programmed with More or Less Time Adjustment. Touch the POWER LEVEL pad once or twice after selecting the weight. See page 16. 3. To defrost other foods or foods above or below the weights allowed on CompuDefrost Chart on page 15 use time and 30% power. See Manual Defrost below. 4. You may choose to enter the weight in tenths of pounds. This procedure may be easier with larger weights, such as 4 pounds, because it requires fewer touches. To program, touch desired COMPU DEFROST pad and enter weight by touching the number pads. Ex: touch STEAKS/CHOPS then 4 and 0 for a weight of four pounds or touch STEAKS/ CHOPS then 2 and 2 for a weight of 2.2 lb. 5. To use any CompuDefrost pad, touch within 3 minutes after cooking, opening and closing the door or touching the STOP/CLEAR pad. MANUAL DEFROST If the food that you wish to defrost is not listed on the COMPU DEFROST CHART or is above or below the limits in the "Amount" column on the COMPU DEFROST CHART (see page 15), you need to defrost manually. You can defrost any frozen food, either raw or previously cooked, by using Power Level for 30%. Follow the exact 3-step procedure found under To Set Power Level on page 9. Estimate defrosting time and press POWER LEVEL pad eight times for 30% power. For either raw or previously cooked frozen food the rule of thumb is approximately 4 minutes per pound. For example, defrost 4 minutes for 1 pound of frozen spaghetti sauce. Always stop the oven periodically to remove or separate the portions that are defrosted. If food is not defrosted at the end of the estimated defrosting time, program the oven in 1 minute increments on Power Level 30% until totally defrosted. When using plastic containers from the freezer, defrost only long enough to remove from the plastic in order to place in a microwave-safe dish. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

14
SPECIAL FEATURES
CompuDefrost automatically defrosts all the foods
shown in the CompuDefrost Chart on page 15.
Round the weight to the nearest half pound. (Ex: if the
steak’s actual weight is 2.2 lb round to 2.0 lb If the
steak’s weight is 2.4 lb round to 2.5 lb.)
To enter weight, touch the desired
COMPU DEFROST
pad for a 0.5 lb increase per touch. (Ex: touch four
times for 2.0 lb.)
Suppose you want to defrost a 2.0 pound steak .
COMPU DEFROST
NOTE:
1.
If you attempt to enter more or less than the allowed
weight as indicated in chart below,
ERROR
will
appear in the display.
2. CompuDefrost can be programmed with More or
Less Time Adjustment. Touch the
POWER LEVEL
pad once or twice after selecting the weight. See
page 16.
PROCEDURE
DISPLAY
1
Quickly touch
STEAK/CHOPS
pad 4 times for
2.0 lb. The oven will start automatically.
2
After the 1st stage, open the door, turn steak
over and shield any warm portions. Close the
door.
STEAKS/
CHOPS
2.0
LBS
DEF HELP
The oven will stop and directions will be
displayed. Follow the indicated message.
Touch
START
pad.
3
After the 2nd stage, open the door and shield
any warm portions. Close the door.
Touch
START
pad.
4
After defrost cycle ends, cover and let stand
as indicated in chart below.
x 4
MANUAL DEFROST
If the food that you wish to defrost is not listed on
the COMPU DEFROST CHART or is above or below
the limits in the “Amount” column on the COMPU
DEFROST CHART (see page 15), you need to defrost
manually.
You can defrost any frozen food, either raw or
previously cooked, by using Power Level for 30%.
Follow the exact 3-step procedure found under To Set
Power Level on page 9. Estimate defrosting time and
press
POWER LEVEL
pad eight times for 30% power.
For either raw or previously cooked frozen food the
rule of thumb is approximately 4 minutes per pound.
For example, defrost 4 minutes for 1 pound of frozen
spaghetti sauce.
Always stop the oven periodically to remove or sepa-
rate the
portions
that
are
defrosted.
If
food
is
not
defrosted
at
the
end
of
the
estimated
defrosting
time, program the oven in 1 minute increments on
Power Level 30% until totally defrosted.
When using plastic containers from the freezer,
defrost only
long
enough
to
remove
from
the
plastic
in order to place in a microwave-safe dish.
3. To defrost other foods or foods above or below
the weights allowed on CompuDefrost Chart on
page 15 use time and 30% power. See Manual
Defrost below.
4. You may choose to enter the weight in tenths of
pounds. This procedure may be easier with larger
weights, such as 4 pounds, because it requires
fewer touches. To program, touch desired
COMPU
DEFROST
pad and enter weight by touching the
number pads. Ex: touch
STEAKS/CHOPS
then
4
and
0
for a weight of four pounds or touch
STEAKS/
CHOPS
then
2
and
2
for a weight of 2.2 lb.
5. To use any CompuDefrost pad, touch within 3 min-
utes after cooking, opening and closing the door or
touching the
STOP/CLEAR
pad.
START
START