Sharp XE-A106 Quick Start Guide - Page 2
Basic Programming, Now, you are ready - cash register manual
UPC - 074000049505
View all Sharp XE-A106 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4 Basic Programming Turn the mode switch to the Z/PGM position. Setting the Time REG OFF X/Flash Z/PGM VOID Enter the time in 4 digits ("hhmm" format) using the 24 hour system. Press the #/ SBTL key once to program the next item or twice to exit the programming mode. Example: #/ SBTL #/ SBTL Time (2:30 p.m.) Setting the Date Enter the date in 6 digits using the month-day-year format. Press the #/ SBTL key once to program the next item or twice to exit the programming mode. Example: #/ #/ SBTL SBTL Date (February 15, 2010) Setting Tax Rates (%) Specify a tax rate (%) for calculation of tax on each taxable subtotal using the following sequence: 9 #/ SBTL Tax number (1-4)* @/TM R @/TM Q R: Tax rate (0.0000% to 99.9999%) x 10000 (Enter the rate in 6 digits. Leading zeros may be omitted.) Q: Minimum taxable amount (0.01 to 99.99) x 100 (Smallest amount for which tax must be collected. ) *Up to 4 types of tax are programmable. Example 1: Tax rate 7.0000%, Min. taxable amount $0.11 for Tax 1 #/ SBTL @/TM @/TM Tax 1 Tax rate (7.0000%) Min. taxable amount ($0.11) Example 2: Tax rate 4.0000%, Min. taxable amount $0.00 for Tax 2 #/ SBTL @/TM NOTE Tax 2 Tax rate (4.0000%) Your cash register is pre-programmed so that you can use it with minimum set-up. To change the settings, see the instruction manual. Initial settings Departments 1-4: Taxable 1 ; Departments 5-8: Non-taxable 5 Now, you are ready! Before Starting Entries Turn the mode switch to the REG position. REG OFF X/Flash Z/PGM VOID Enter a clerk code (1-4) and press . CLK# (Once the clerk code entered, re-entry of the clerk code is not needed until the clerk is changed.) 1 CLK# Clerk code Registration Example (When the Customer Pays by Cash) CLK# 5 1 7 3 #/ SBTL Clerk code Price and dept. Price and dept. Amount tendered Reading and Resetting X Reports (reading) Turn the mode switch to the X/Flash position and press . Z Reports (reading and resetting) In the Z/PGM mode, press .(In this case, grand total resetting is not performed.) Flash Reports (displayed but not printed) In the X/Flash mode: Press dept. key for dept. sales reports Press #/ SBTL for sales total reports Press CH for cash-in-drawer reports For further information, please read the instruction manual. Printed in China O(TCADH2554RCZZ)c