Sharp XG-C330X XGC330X|XGC430X Operation Manual - Page 38

Image Projection MOUSE/Adjustment buttons ('/"/\/|) BREAK TIMER button RETURN button PICTURE MODE button ECO/QUIET button Displaying and Setting the Break Timer This function allows you to show the remaining time for break during meeting. 1 Press BREAK TIMER. The break timer starts to count down from 5 minutes. "On-screen Display 2 When " " is displayed, press ' , " , \ or | to set the break timer. • You can set anywhere between 1 and 60 minutes (in 1 minute units). 3 Press BREAK TIMER to cancel the break timer. Switching the Eco/Quiet Mode Press ECO/QUIET on the remote control or ECO/ QUIET on the projector to switch the Eco/Quiet mode between on and off. • When the Eco/Quiet Mode is set to "On", the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. (Projection brightness decreases 20%.) Power consumption Brightness (When using AC 100V) Lamp life On 80% 300 W Approx. 3,000 hours Off 100% 360 W Approx. 2,000 hours Selecting the Picture Mode You can select the suitable picture mode for the projected image, such as movie or video game. Press PICTURE MODE on the remote control. • When pressing PICTURE MODE, the picture mode changes in order of: STANDARD PRESENTATION MOVIE GAME sRGB Note • "sRGB" is displayed only when RGB signal is input. • Press RETURN to return to the "STANDARD" mode while "Picture Mode" is displayed on the screen. -36