Sharp XG-C330X XGC330X|XGC430X Operation Manual - Page 65

Computer Compatibility Chart The table below lists signal codes that are compatible with the projector. When the images are distorted or cannot be projected, adjust the output signal of your computer and so forth while referring to the table below. Computer • Multiple signal support Horizontal Frequency: 15-70 kHz Vertical Frequency: 43-85 Hz Pixel Clock: 12-108 MHz Sync signal: Compatible with TTL level • Compatible with sync on green signal • SXGA+ and SXGA compatible in intelligent com- pression • Intelligent Compression and Expansion System resizing technology The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC PC MAC 13" MAC 16" MAC 19" MAC 21" Resolution Horizontal Frequency (kHz) 640 × 400 VGA 720 × 400 640 × 480 SVGA 800 × 600 XGA 1,024 × 768 SXGA 1,152 × 864 1,280 × 1,024 SXGA+ 1,400 × 1,050 1,280 × 768 WXGA 1,280 × 800 1,360 × 768 1,366 × 768 VGA 640 × 480 SVGA 800 × 600 832 × 624 XGA 1,024 × 768 SXGA 1,152 × 870 27.0 31.5 37.9 27.0 31.5 37.9 26.2 31.5 34.7 37.9 37.5 43.3 31.4 35.1 37.9 46.6 48.1 46.9 53.7 35.5 40.3 48.4 56.5 60.0 68.7 55.0 66.2 67.5 64.0 64.0 47.8 62.6 47.7 47.8 34.9 37.8 49.7 60.2 68.7 Vertical Frequency (Hz) VESA Standard DVI Support 60 70 85 ✔ 60 70 85 ✔ 50 60 ✔ 70 72 ✔ ✔ 75 ✔ 85 ✔ 50 56 ✔ 60 ✔ 70 72 ✔ 75 ✔ 85 ✔ 43 50 60 70 ✔ ✔ ✔ 75 ✔ 85 ✔ 60 70 75 ✔ 60 ✔ 60 60 75 60 60 67 60 75 75 75 Display Upscale True Intelligent Compression Upscale True Intelligent Compression Note • This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in "CRT only" mode. Details on how to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400" appears on the screen. • When projecting the RGB interlace signal using COMPUTER/COMPONENT 1, 2 or DVI-D with "Signal Type" set to "Auto" or "RGB", the image may not be projected as desired. In this case, use either Video or S-Video. DTV Signal 480I 480P 540P 576I 576P 720P 1035I 1035I 1080I 1080I Horizontal Frequency (kHz) 15.7 31.5 33.8 15.6 31.3 45.0 28.1 33.8 28.1 33.8 Vertical Frequency (Hz) 60 60 60 50 50 60 50 60 50 60 DVI Support ✔ ✔ ✔ ✔ ✔ ✔ -63 Appendix