Sharp XL-3000 XL3000 Operation Manual - Page 19

To interrupt playback: Main unit operation: Press the button. To resume playback from the same point, press the Remote control operation: Press the button. To resume playback from the same point, press the button again. button. To stop playback: Press the button. To remove the CD: While in the stop mode, press the (OPEN/CLOSE) button. Press the CD eject button and remove the CD. Caution: z Do not stop or move the CD compartment cover manually. It may cause malfunctions to the unit. z Be careful not to jam your fingers in the CD compartment cover. z If the power fails while the compartment is open, wait until the power is restored. z If a disc is damaged, dirty, or loaded upside down, "NO DISC" or "READ ERR" will appear on the display. z Keep foreign objects out of the CD compartment. z Subjecting the unit to shock or vibration may cause mistracking. z When the unit is not being used, be sure to close the CD com- partment. If it is left open, the lens may be covered with dust and the unit may not operate properly. z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. CD Playback - Listening to a CD - CD Eject Button Notes: z After removing the CD, make sure to press the (OPEN/CLOSE) button and close the CD compartment. z When the unit enters the stand-by mode, the opened CD com- partment cover will be closed automatically. After use: Press the POWER button to enter the power stand-by mode. 19 01/1/17 XL-3000(U2)2.fm