Sharp XL-3000 XL3000 Operation Manual - Page 21

Programmed Play By specifying tracks from 1 to 99, you can choose up to 20 selections for playback in the order you like. 3 Press the MEMORY/SET (MEMORY) button to save the track number. CD Playback - Programmed Play - Playback order Total playback time 4 Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be programmed. 5 Press the ( ) button to start playback. 1 While in the stop mode, press the MEMORY/SET (MEM- ORY) button to enter the programming save mode. 2 Within 30 seconds, press the or button to select the desired track. Selected track number Playback time To clear the programmed selections: Press the CLEAR button on the remote control while the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. To cancel the programmed play mode: While in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. Adding tracks to the program: If a program has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the last track of the original program. Notes: z Opening the CD compartment automatically cancels the pro- grammed sequence. z Even if you press the POWER button to enter the stand-by mode or the function is changed from CD to some other function, the programmed selections will not be cleared. z During program operation, random play is not possible. 21 01/1/17 XL-3000(U2)3.fm