Sharp XL-E80 XL-E80 Operation Manual - Page 22

XL-E80 Recording on a cassette tape Before recording: " When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. " SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. " The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). " For recording, use only normal tapes. Do not use metal or CrO tapes. " Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. Erase-prevention tab of cassette tapes: " When recording on a cassette tape, make sure that the erase-prevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. " To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhesive tape to record on the tape without the tab. Tab for side B Side A Tab for side A Tape Recording ! Recording from a CD or MP3 disc 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button until "CD" appears on the dis- play. When operating with the remote control, press the CD button. 3 Load the desired disc. 4 Load a cassette into the cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 5 Press the TAPE ( ) button. Recording will be paused. 6 Press the ( ) button to start recording. " Playback of the disc will start in a few seconds after the tape starts. " When the playback is finished, the disc and the cassette will stop automatically. 22