Sharp XL-MP131 XL-MP131 Operation Manual - Page 17
CD or MP3/WMA disc Playback
View all Sharp XL-MP131 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
XL-MP131 CD or MP3/WMA disc Playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1. 4 Place the disc on the disc tray 1, label side up. Be sure to place 3" (8 cm) disc in the middle of the disc trays. 5" (12 cm) 3" (8 cm) 5 Press the OPEN/CLOSE button to close the disc tray 1. [CD] MP3 indicator [MP3/WMA] WMA indicator Total number of Total playing Total number Total number tracks on the disc time of the disc of folders of files Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds). 6 You can place discs on the trays 2 - 5 by following steps 3 - 5. 7 Press the / button to start playback. Playback will begin from track 1 on DISC 1. After that disc finishes playing, the next disc will automatically play. After the last track on the fifth disc is played, the unit will stop automatically. When there is no disc in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a disc. To exchange other discs while playing a disc: Press one of the 1 - 5 buttons for the stopped disc and within 5 seconds, press the OPEN/CLOSE button and exchange discs. To remove the discs: In the stop mode, press the 1 - 5 button and within 5 seconds, press the OPEN/CLOSE button. Caution: Do not place two discs in one disc tray. Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions. Do not push the disc tray while it is moving. If the power fails while the tray is open, wait until the power is restored. If the disc tray is stopped with force, "ER-CD20" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. If a disc is damaged, dirty, or loaded upside down, the disc will be skip or not play. Disc play indicator 17