Sharp XL-MP150 XL-MP150 Operation Manual - Page 28

Tape Playback Listening to a cassette tape XL-MP150 Before playback: z For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) z Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. z Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. X-BASS (SURROUND) /DEMO 28 „ Tape playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TAPE button. 3 Open the cassette door by push- ing the area marked " PUSH EJECT". 4 Load a cassette into the cas- sette compartment with side A facing you. 5 Press the button to choose one side or both sides. ... To listen to both sides. To play both sides ( ), start from side A. When playback starts from side B, side A will not be played. ... For endless repeat play of both sides. ... To listen to one side. 6 Press the / ( ) button to listen to side A, or the ( ) button for side B. Forward play Reverse play Auto power on function: When you press any of the following buttons, the unit turns on. z TAPE button (main unit and remote control): The unit turns on and the "TAPE" function is activated. z TAPE button on the remote control: The unit turns on and side A playback starts (regardless of the last function). z / button on the main unit: The unit turns on and playback of the last function starts (CD,TAPE,TUNER,VIDEO/AUX). Auto power off function: In the stop mode of tape operation, the main unit enters the stand-by mode after 15 minutes of inactivity.