Sharp XV-Z15000 XV-Z15000 Operation Manual - Page 39
Switching the Iris Setting, Eco+Quiet, Using the Advanced
UPC - 074000365780
View all Sharp XV-Z15000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3Switching the Iris Setting This function controls the quantity of the projected light and the contrast of the image. ■ IRIS1 (Manual) Selectable items Description High Brightness This mode gives priority to brightness over contrast. High Contrast This mode gives priority to contrast over brightness. ■ IRIS2 (Auto) This automatically selects the optimal contrast to match the image. Selectable items On Off Description This mode gives priority to contrast with the use of auto adjustment. This mode gives priority to brightness without the use of auto adjustment. Note • You can also use IRIS 1, 2 on the remote control to change the Iris. (See page 28.) 4 Eco+Quiet Selectable items On Off Brightness and Power consumption Approx. 75% 100% Note • When "Eco+Quiet" is set to "On", the power consumption will decrease and the lamp life will extend. (Projection brightness decreases approximately 25%.) 5Using the Advanced "Advanced" allows you to make even finer adjustments to the image so that it appears just the way you want it to. To display the Advanced menu, select "Advanced" and press ENTER. Menu operation ⇒ Page 34 6Correcting Gradation of Video (Gamma Correction) When the darker areas of the image become difficult to see because of the image or the projection environment, you can correct the gamma setting to make the image brighter and easier to see. Selectable items +2 +1 0 -1 -2 Description Provides a brighter gradation. Standard setting Provides a darker gradation. 7Adjusting the Colors You can select the color of the projected image to correct and then adjust it to the desired color by setting "Hue", "Saturation", "Value", and "Effect". Note • Before performing this adjustment, prepare the image to be adjusted. • You can perform this adjustment easier in the still image than in the moving image. 1 Select "C.M.S.1" or "C.M.S.2" (C.M.S.: Color Management System) in the "Advanced" menu, and press ENTER. • If there is no data for the stored corrected color, the color selection screen and the picker is displayed. (Go to step 2.) Picker Useful Features Note • When the "Advanced" settings are displayed, select "Advanced" again and press ENTER to return to the "Picture" menu. -37