Singer 1 One Instruction Manual 36 - Page 15
®-®.
![]() |
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
* Thread the looper area of the machine following the yellow color coded thread guides ®-®. 0 * Remove the cylinder cover (page 9) to expose the lower looper for threading. * Turn the hand wheel toward you until the lower looper is at the far left. to iQ * Pull 7.5 - 10 cm (3 - 4 inches) of thread through thread guide (1). * Insert the thread through the left end of the lower looper. ® * Drop the thread. Note: Use the tweezers that are in the accessory set to aid in threading the looper. * Turn the hand wheel toward you until the lower looper is at the far right. * Pick up the thread and pass it through the hole in the end of the looper C) . * The thread should be positioned in the groove of the lower looper. * Pull about 5 cm (2 inches) of thread through the looper and place it over the top of the upper looper and to the back of the throat plate. o' N-H 13
![](/manual_guide/products/singer-1-instruction-manual-36-8ae4562/15.png)