Singer 1 One Instruction Manual 40 - Page 31
Turning, square, corners
![]() |
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
22. Turning square corners Outside corner (-- -, Cutting line = 2cm 2cm A 1. Cut out approximately 2cm from the corner in line with the overedge seam edge. 2. Sew to point A, one stitch beyond edge of fabric and stop machine. 3. Raise needle and presser foot. 4. Pull fabric to the rear of machine just enough to release the thread caught on the finger of the throat plate. 5. Turn fabric and lower presser foot so that its finger is positioned on the edge of fabric. 6. Pull slack threads up, then start to sew. Inside corner ( B . .." 1. Cut fabric at seam edge. 2. Place movable knife in non-operating position. 3. Fold fabric as shown in sketch. 4. Sew to point B, as close as possible to the diagonal fold. Leave needle in fabric. 5. Raise presser foot, leaving the needle in the fabric. 6. Refold fabric so that the overedge is in line with the already sewn seam. 29
![](/manual_guide/products/singer-1-instruction-manual-40-d42bba9/31.png)