Singer 14T968DC PROFESIONAL 5 Instruction Manual 2 - Page 126
Elastic Foot
View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
ELASTIC FOOT The Elastic Foot is used for inserting elastic into a seam. It can be used for swimwear, lingerie and other sewing projects. Machine Preparation • Differential Feed: • Needles: • • Upper Knife: • Stitch Length: • Foot: Set to "N" Use both the right & left needle for wider elastic, right needle for narrow elastic Engaged Set to 3 or 4 Attach (snap-on) elastic foot Sewing Instructions • Set the needles at the highest position • Raise the presser foot • Loosen screw (2), which will allow the brake (1) to be raised • Insert the elastic tape (3) into the foot under the brake and run it through to the back of the foot • Tighten screw (2); the more you tighten, the more pressure will be added to the brake (1), causing the elastic to stretch even more • Lay the seam under the presser foot, lining up the fabric to sew a 5/8" seam • Lower the presser foot and begin to sew • When seam is complete, continue to sew over the elastic for approximately 1 to 2 inches. Cut elastic and remove from machine. Additional Presser Feet page 3