Singer 14T968DC PROFESIONAL 5 Instruction Manual 2 - Page 27
Place the thread through threading guide
View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
6. Place the thread through threading guide and . 7. Continue threading guides , , and . 8. Thread the looper eye (A) from front to back. Pull about 4 inches of thread through the looper. Position the thread into the V cutout (B) on the threader. Firmly hold the thread tail with your left hand and pull threader lever (C) up into place (D). Gently pull 5-6" of thread to the back of the machine. "V" cutout Threader lever Thread Right Overedge with regular overlock thread. 1. Raise the Presser Foot to release the tension disks. Thread the right needle as illustrated 1-9. 2. Pass thread from back to the front through the thread guide . Four-Thread Safety Stitch page 10
6. Place the thread through threading guide
f
and
g
.
7. Continue threading guides
h
,
i
,
j
and
k
.
8. Thread the looper eye (A) from front to back.
Pull about 4 inches of thread
through the looper.
Position the thread into the V cutout (B) on the threader.
Firmly hold the thread tail with your left hand and pull threader lever (C) up
into place (D).
Gently pull 5-6ā of thread to the back of the machine.
Ā±
Thread Right Overedge with regular overlock thread.
1. Raise the Presser Foot to release the tension disks.
Thread the right
needle as illustrated 1-9.
2. Pass thread from back to the front
through the thread guide
c
.
Four-Thread Safety Stitch page 10
āVā cutout
Threader lever