Singer 14T968DC PROFESSIONAL 5 Instruction Manual - Page 70
Pull about 4
![]() |
View all Singer 14T968DC PROFESSIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5. Turn the handwheel toward you until the lower looper extends 5-10mm (approximately ½ inch) from the needle plate edge. 6. Thread the looper area of the machine following the green color coded thread guides 4-9. 7. Thread the hole in the Upper Looper from front to back . Pull about 4 inches of thread through the looper and place to the back of the throat plate. Three-Thread Overlock (wide-decorative) page 4
![](/manual_guide/products/singer-professional-5-serger-14t968dc-instruction-manual-d990fd1/70.png)
5. Turn the handwheel toward you until the lower looper extends 5-10mm
(approximately ½ inch) from the needle plate edge.
6. Thread the looper area of the machine following the green color coded
thread guides 4-9.
7. Thread the hole in the Upper Looper from front to back
k
.
Pull about 4
inches of thread through the looper and place to the back of the
throat plate.
Three-Thread Overlock (wide-decorative) page 4